pH Plus | 2lb Bottle

pH Plus raises pH and prevents corrosion. The pH should be between 7.2-7.8 ppm; 7.4 is the ideal pH rating to keep water clean and clear.

For best results:
*Dissolve granular product first into a small container of hot water, and then apply the solution to the spa water. The amount of pH Plus per 500 gallons is 2 Tablespoons if pH is 6.8-7.2 and 4 Tablespoons if pH is below 6.8. Add the product to the spa water with the curculation pumps on. 

*Turn on ciculation system for 30 minutes. After 6-8 hours, retest water and if pH is still low, repeat the steps above. The amount of pH Plus per 500 gallons is 2 Tablespoons if pH is 6.8-7.2 and 4 Tablespoons if pH is below 6.8. Add the product to the spa water with the curculation pumps on. 

**Please refer to the precautionary statements and hazards on the back of the bottle**